T-Rex Moller 2 Distortion & Boost available now at High Street Music Preston. Home of T-Rex Pedals in Melbourne’s Northern Suburbs. Contact store for best price.
NAMED AFTER DANISH GUITARIST KNUD MØLLER
T-Rex Møller 2 delivers the same classic overdrive that made it’s predecessor one of T-Rex’s most sought-after pedals. Named after Danish guitarist Knud Møller, for whom the original pedal was designed, Møller 2 features a more durable “Bass Boost” toggle switch and easier-to-read control knob graphics. The pedal is armed with a 0-20 db Clean Boost, as well as a Mix control which lets you dial in the perfect balance between distorted and clean signals. Rolled all the way up and with distortion maxed, the pedal sounds just like a vintage tube amp at full volume. Roll the Mix knob back a bit, and your clean signal starts to get through; if you pick lightly or roll back your guitar volume, you get a stunning clean, softly-clipping sound that retains all the feel and dynamics of your original tone, only bigger, louder and richer. The boost function lets you dial in a solo level, whether the overdrive circuit is activated or not.
CLASSIC OVERDRIVE WITH CLEAN BOOST
- Classic bluesy overdrive
- Provides a wealth of dynamic tones
- Dial in the perfect balance between overdrive and clean signal
- Independent clean boost for your solo
- Stunning bluesy sound with just a little dirt around the edges
TECH SPECS
Input impedance @ 1KHz | Higher than 1M Ohm |
---|---|
Output impedance @ 1KHz | Lower than 1K Ohm |
Power supply | 9V DC (T-Rex FuelTank) |
Minimum power supply voltage | 8,5V DC |
Maximum power supply voltage | 12,5V DC |
Current draw @ 9V DC | 16 mA |
Maximum input signal V p-p | 2,5V p-p |
Battery type | 9V battery 6F22 |
Battery life | 5-8 hours |
External connectors | input jack, output jack, 9V DC jack |
Controls | on/off, boost on/off, level, gain, tone, mix, bass boost |
Pedal size incl. knobs (W x H x D) | 100 x 55 x 120 mm / 3,9 x 2,2 x 4,7 inch |
Weight excl. packaging | 0,35 kg / 12,3 oz |